Make The Cut - Guide for SOCOM II: U.S. Navy Seals

LAG SWITCH-FOR-Socom2



By-Half Life†
Title- Make The Cut..
Date-Augest 22 2005


Ok being a part of a huge socom2 glitch clan
i thought i might help a few on something rare that not many people know.

Since socom3 is coming in the winter socom2 won't have much players
on it as socom3

But thus there will allways be players and allways be some sort of ways to
cheat.

Well This is a FAQ on all the emails i resived asking how to make 
a lag Switch.

Hears what you do.

1- Buy or get  a long enough internet (Ethrnet) Wire that gos
from your ps2 to a Modom or etc.

2- Cut the out side rubbe off the cord but not all of it only at the near end

3-Inside you will see all diffrent coloured wires.

Cut the Green wire (Green Go's for [STAND BY]

Or you can cut orange (Orange go's for [DISCONNECT/PullCord]

4- Cut the rubber around that wire as well

IMPORTANT!!!!!!!!!!!!!!!!! INSIDE THAT TUBEING IS A METAL

VERY THIN AS THIN AS A HAIR A VERY FINE METAL WIRE DO NOT CUT THIS AT ALL!
AND MAKE SURE ALL POWER IS CUT OFF TO THE WIRE OR YOU MAY GET 
HIGHLY SHOCKED!

5-IF you cut the GreenWire then cut the Orange wire With Black in the middle.
And if you cut the orange then cut the Green With Orange In the middle.

6- Attatch both ends into a light switch one at +1 and the other at

-0

7- Connect the wire to your modom and then your ps2

GO ONLINE and when your in a game flick the light switch to ON

Your player will lag Veyr badly and it is all most impossible to get hit
or killed.



Note- A lag Switch is very sensitive to Cold Air.

The wires with in the Internet Cord can split into two from cold air

Please keep your lag switch in a nice warm room.



Thanks.

Steve.